BEX STF thin-disc Flat Spray Nozzles

#id: 170

SPRAY CHARACTERISTICS:

STF spray nozzles produce a flat, fan-shaped spray pattern, similar to the F Series. Spray

angles are available for a 0° solid stream to 90°, measured at 3 bar. Spray angles generally

increase with pressure, as shown in the capacity table below.

Spray density tapers off toward the outside edges of these sprays, to permit overlapping of

spray patterns while maintaining uniform spray density.

 

TYPICAL APPLICATIONS:

The STF series is designed for applications where space is at a minimum, or where the

nozzles must not protrude from the header. Typically the outer surface of the nozzle is

flush with the outside of the header.

(NOTE: Certain models will protrude slightly).

 

 

Stáhnout pdf